How to Check Hard Drive Health With CrystalDiskInfo

Hào Võ · Updated Nov 19, 2026

Kiểm Tra Tình Trạng Sức Khỏe Ổ Cứng Bằng CrystalDiskInfo: Hướng Dẫn Chi Tiết

How to check hard drive health with CrystalDiskInfo: (1) download CrystalDiskInfo (free) from the official website and install it (untick any bundled offers if present); (2) open it — it reads the drive’s S.M.A.R.T. data; (3) look at Health Status: Good (blue) is fine, Caution (yellow) means the drive is deteriorating — back up and monitor it, Bad (red) means it’s failing — back up immediately and replace the drive; (4) watch these values: Reallocated Sectors Count, Current Pending Sector Count, temperature and power-on hours. Signs of a problem drive: slowdowns or freezes, read/write errors, strange noises, lost data. If the status is Caution or Bad, don’t wait — back up your data before it’s too late. Regular checks help prevent data loss.

Why checking hard drive health matters

Checking your hard drive’s health is vital for protecting your data. The drive stores all your information and documents; when it fails, you risk serious data loss — especially if you never check its condition.

Warning signs of a failing drive

  • The computer is slow or often freezes.
  • Errors when reading or writing data.
  • Strange noises from the drive, which may indicate a mechanical problem.
  • Data goes missing or becomes inaccessible.

The cost of ignoring drive health

  • Losing important data can be very costly.
  • Lower productivity and disrupted daily work.
  • Repair or replacement costs.

Checking drive health with CrystalDiskInfo

CrystalDiskInfo is free software that checks the condition of both HDDs and SSDs, giving detailed health information from their S.M.A.R.T. data.

Why CrystalDiskInfo?

It’s easy to use, gives detailed information, and supports many languages — including Vietnamese.

Understanding the interface

  • Health Status: Good, Caution or Bad.
  • Temperature: shows whether the drive is running within a safe range.
  • Power On Count / Power On Hours: how many times the drive has been powered on and how many hours it has run — useful for estimating its age.
  • Other S.M.A.R.T. values: Reallocated Sectors Count and Current Pending Sector Count are key indicators of the drive’s condition.

Step-by-step guide

Download and install CrystalDiskInfo

Download CrystalDiskInfo from the official website, open the installer and follow the simple steps.

Read and analyse the results

Open CrystalDiskInfo to see your drive’s information. Check the health status and temperature. If the status is “Caution” or “Bad”, take action.

What to do if you get a warning

  • Back up your data immediately to avoid further loss.
  • Check for bad sectors with other tools such as HDDScan or the manufacturer’s diagnostic tool.
  • If the drive’s condition keeps getting worse, replace it.

Tips for using CrystalDiskInfo

Set temperature alerts

Set temperature alerts with safe thresholds — overheating can lead to failures.

Check regularly

Check your drive’s health at least once a month to catch problems early.

Maintain your drive

Defragment HDDs and make sure TRIM is enabled for SSDs (Windows’ Optimize Drives handles both) to maintain performance.

Conclusion

Checking your hard drive’s health regularly is essential. CrystalDiskInfo makes it easy to monitor your drives and protect your data. See also our IT support service.

Contact IT Systems Vietnam

Contact IT Systems at hotline 028.3995.03.59 or contact@itsystems.com.vn. Follow us on Facebook and YouTube.

Need a technician to check your computer on site?

IT Systems repairs desktops and laptops on site in Ho Chi Minh City, offers remote support within 30 minutes and quotes for your approval before any repair.

On-site computer repair · Call +84 28 3995 0359

Request adviceChat on ZaloCall hotline