|
Description |
Specifications |
| Performance | |
|
Switching capacity |
176 Gbps |
|
Forwarding rate |
130.95 Mpps |
|
Virtual Networks |
4 |
|
Stacking bandwidth |
160 Gbps |
|
Total number of MAC addresses |
32,000 |
|
Total number of IPv4 routes (ARP plus learned routes) |
14,000 (10,000 direct routes and 4,000 indirect routes) |
|
IPv4 routing entries |
4,000 |
|
IPv6 routing entries |
2,000 |
|
Multicast routing scale |
1,000 |
|
QoS scale entries |
1,000 |
|
ACL scale entries |
1,600 |
|
Packet buffer per SKU |
6 MB buffers |
|
Flexible NetFlow (FNF) entries |
16,000 flows |
|
DRAM |
4 GB |
|
Flash |
4 GB |
|
VLAN IDs |
4096 |
|
Total Switched Virtual Interfaces (SVIs) |
1000 |
|
Jumbo frames |
9198 bytes |
|
Wireless bandwidth per switch |
Up to 48 Gbps |
|
Default primary power supply |
PWR-C5-1KWAC |
|
Optional secondary power supply |
PWR-C5-1KWAC |
|
Features |
|
| Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF – 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
| Advanced switch capabilities and scale | EIGRP, HSRP, IS-IS, BSR, MSDP, IP SLA, OSPF |
| Network segmentation | VRF, VXLAN, LISP, SGT |
| Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP |
| Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
| Security | MACsec-128 |
| Physical Specifications | |
| Chassis Dimensions | 1.73 x 17.5 x 13.8 Inches 4.4 x 44.5 x 35.0 Centimeters |
| weight | 9.59 Pounds 5.5 Kilograms |
| Mean time between failures (hours) | 375,570 |
| Connectors | |
| Connectors and cabling |
– 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
– 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
– 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
– 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
– SFP+ connector
– Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling
– Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
– Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor
|
| Power connectors |
Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
|
| Standards, Safety and compliance information | |
| Standards |
EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification IEEE 802.3bz 10G BASE-T specification RMON I and II standards SNMPv1, v2c, and v3 |
| Safety certifications |
– IEC 60950-1
– UL 60950-1
– CAN/CSA C22.2 No. 60950-1
– EN 60950-1
– AS/NZS 60950.1
– Class I Equipment
|
| Electromagnetic emissions certifications |
– 47 CFR Part 15
– CISPR 22 Class A
– CISPR 32 Class A
– CNS 13438
– EN 300 386
– EN 55022 Class A
– EN 55032 Class A
– EN61000-3-2
– EN61000-3-3
– ICES-003 Class A
– KN 32
– TCVN 7189 Class A
– V-3 Class A
– CISPR 24
– EN 300 386
– EN 55024
– KN 35
– TCVN 7317
|
| Environmental |
Reduction of Hazardous Substances (ROHS) 5
|
Swtich C9200-48T-A
Mô Tả: Catalyst 9200 48-port Port 10/100/1000 Data Switch. Network Advantage
