Xin vui lòng liên hệ qua Zalo để kiểm tra tình trạng hàng
LS-5560S-52P-SI-GL – Switch H3C LS-5560S-52P-SI-GL
28.690.000 ₫
H3C S5560S-52P-SI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC)
Thông tin sản phẩm
Thông số kỹ thuật
H3C S5560S-52P-SI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC)
Tổng quan về LS-S5560S-52P-SI-GL – H3C S5560S-SI Series Standard Gigabit Switches
H3C S5560S-SI là sự phát triển mới nhất của công tắc truy cập Gigabit Lớp 3. Đây là thiết bị chuyển mạch được quản lý thông minh thế hệ thứ hai được thiết kế cho các mạng yêu cầu hiệu suất cao, mật độ cổng cao, băng thông Uplinks và dễ triển khai.
H3C S5560S-SI series switch offers Gigabit connectivity with10/100/1000 autosensing ports and 1G or 10G optical uplink.
H3C S5560S-SI series switch includes four models as follows:
S5560S-28P-SI: 24*10/100/1000TX Ethernet ports + 4*SFP ports;
S5560S-52P-SI: 48*10/100/1000TX Ethernet ports + 4*SFP ports;
S5560S-28S-SI: 24*10/100/1000TX Ethernet ports + 4*SFP+ ports;
S5560S-52S-SI: 48*10/100/1000TX Ethernet ports +4*SFP+ ports;
Thông số kỹ thuật LS-5560S-28P-SI-GL – H3C S5560S-SI Series Standard Gigabit Switches
| Item | S5560S-28P-SI | S5560S-52P-SI | S5560S-28S-SI | S5560S-52S-SI |
| Box switching capacity | 598Gbps | |||
| Port switching capacity | 56Gbps | 104Gbps | 128Gbps | 176Gbps |
| Packet forwarding rate | 42Mpps | 78Mpps | 96Mpps | 132Mpps |
| CPU | 1 Core, 800MHz | |||
| Dimensions (H × W × D) | 43.6 × 440 × 160 mm | 43.6 × 440 × 230 mm | 43.6 × 440 × 160 mm | 43.6 × 440 × 230 mm |
| Weight | < 2.5 kg | < 3.5 kg | < 2.5 kg | < 3.5 kg |
| Management Ethernet ports | 1 console port | |||
| SDRAM/Flash | 512MB/256MB | |||
| Maximum stacking num | 9 | |||
| Stacking bandwidth | 16Gbps | 80Gbps | ||
| Service ports | 24 × 10/100/1000Base-T autosensing Ethernet ports
4 × SFP ports |
48 × 10/100/1000Base-T autosensing Ethernet ports
4 × SFP ports |
24 × 10/100/1000Base-T autosensing Ethernet ports
4 × 10G SFP+ ports |
48× 10/100/1000Base-T autosensing Ethernet ports
4 × 10G SFP+ ports |
| Power consumption | MIN: AC 9W
MAX: AC 23W |
MIN: AC 18W
MAX: AC 41W |
MIN: AC 10W
MAX: AC 24W |
MIN: AC 19W
MAX: AC 44W |
| Operating temperature | 0ºC to 45ºC (32°F to 113°F) | |||
| Operating humidity | 10% RH to 90% RH, non-condensing | |||
| Link aggregation | 1G/10G port aggregation
Static aggregation Dynamic aggregation Multichassis link aggregation |
|||
| Jumbo frame | 10,000 byte | |||
| MAC address table | Blackhole MAC address
MAC learning limit |
|||
| Flow control | 802.3x flow control and half-duplex backpressure | |||
| VLAN | Port-based VLAN
QinQ Voice VLAN MAC VLAN |
|||
| ARP | ARP Detection
ARP speed limit |
|||
| ND | Supported | |||
| VLAN virtual port | Supported | |||
| DHCP | DHCP Client
DHCP Snooping DHCP Relay DHCP Server DHCP Option82 |
|||
| DNS | Static and Dynamic DNS
IPV4 and IPV6 |
|||
| Routing protocols | IPV4/IPV6 static routing
RIP/RIPng, OSPFV1/V2/V3 |
|||
| Strom suppression | Storm suppression based on port bandwidth percentage
Storm suppression based on PPS Storm suppression based on BPS Broadcast traffic/Multicast traffic/Unknown unicast traffic suppression |
|||
| Layer 2 ring network protocol | STP/RSTP/MSTP
STP Root Protection Smart Link RRPP |
|||
| Mirroring | Flow mirroring
Port mirroring |
|||
| QoS/ACL | Packet filter
Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR Bidirectional ACL Port-based speed limiting Flow redirection Time-range 802.1p priority mapping and DSCP priority mapping |
|||
| Layer 2 ring network protocol | STP/RSTP/MSTP/PVST+/RPVST+
STP Root Protection Smart Link RRPP |
|||
| Multicast | IGMP Snooping v1/v2/v3 and MLD Snooping v1/v2
IGMP v1/v2/v3 and PIM-SM/PIM-SSM/PIM-DM |
|||
| Security
l |
Hierarchical user management and password protection
MAC-based authentication 802.1X authentication RADIUS authentication, HWTACACS authentication SSH2.0 Port isolation Port security IP source guard Dynamic ARP detection BPDU guard and root guard HTTPs l EAD |
|||
| Loading and upgrading | Loading and upgrading through FTP/TFTP | |||
| Management and maintenance | Configuration from CLI
Login through Telnet, and the console port Simple Network Management Protocol (SNMP) Remote Monitoring (RMON) IMC network management system WEB management System log Alarming based on severity IRF2 NTP LLDP, LLDP-MED Sflow Debugging information output Telnet-based remote maintenance NQA DLDP Virtual Cable Test Loopback detection |
|||
<!–
Tổng quan
–>






